You actually have to face a frustrating problem when the Wi-Fi gets disconnected time and again. So, in order to keep the internet connection stable, here are a few solutions.

If the Wi-Fi signal strength is weak, then you should first move the computer near to the router.  In case the walls hinder the transmission of the signal, then you should consider setting up the router in a space free of obstructions. But, if there’s a problem with the Wi-Fi signal, then there are numerous fixes that you can certainly try with the computer or the laptop.

Possible Solutions to Fix WiFi Disconnecting And Dropping Issue

Ensure that the Operating System is Up to Date

A host of issues can always be resolved if the computer is running on the latest  version of the operating system. So, as you go to the search bar, you should type ‘Windows Update’ and launch the tool. If the dialog box prompts you to update Windows, then you should proceed with the steps. If that’s not the case, then you can download and thereby install the Windows updates and see if this is the best solution for the issue.

Restart the Network Adapter

It’s pretty easy and simple to restart the network adapter. Here’s what you need to follow

Press the ‘Windows key’ and ‘R’ together till the run dialog box pops on the computer screen.

Now, you need to type ‘ncpa.pl’ and click ‘Ok’ to confirm.

Soon after you right click on the network adapter, you must select ‘Disable’.

Once again you need to click on the network adapter icon and select ‘Enable’.

Update the Drivers

After restarting the network adapter, you need to update the drivers. Here are the steps you need to follow.

Step 1: As you go to the search bar at the bottom leftmost corner of the screen, you should search the ‘Device Manager’.

Step 2: Soon after you have found the tool, you should go to the Network Adapter section.

Step 3: As you right click on the relevant icon, you need to select the ‘Update driver Software’ option from the list.

Restart you Computer

Once you have followed the steps mentioned above, you should restart the computer. But, in certain scenarios, this is the best solution when the problem occurs occasionally. The trick of turning off the OS and switching it on again is much more effective than you can ever think.

Disable the Power Saver Mode

Disable the Power Saver Mode
Disable the Power Saver Mode

If you have accidentally turned on the power saver mode, then this may be the reason for the disruption in the Wi-Fi connection. While the mode is enabled, the network adapter would also be disabled. This would eventually cause a dip in the internet connection and may be annoying at some point in time.

So, here are the steps for disabling the power saver mode.

Step 1: As you go to the search bar, you need to launch ‘Device Manager’ and locate the ‘Network Adapter’ option.

Step 2: Soon after you have found the Network adapter, you need to expand it, select the icon, right click and go to ‘Properties’.

Step 3: Once you hit the power management tab, you must uncheck the option, ‘Allow the computer to turn off this device to save power’.

Try Running the Windows Network Troubleshooter

It’s surely worth to try running the Windows Network Troubleshooter. This would only work when the issue is simple and there’s nothing much you have to do fix the problem. So, as you move ahead, you need to follow the steps mentioned below.

Step 1: As soon as you go to the ‘Search Bar’, you should type ‘Network troubleshooter’ and select the relevant icon.

Step 2: Once you select ‘Identify and Repair network problems’, you should proceed and follow every instruction that appears on the computer screen.

Switch off Wi-Fi Sense

Just in case if you are trying to connect with another network through Wi-Fi sense, then it’s better to disable Wi-Fi sense. So, here are the steps you need to proceed with.

Step 1: Soon after you click the ‘Start’ option, you should go to ‘Settings’.

Step 2: Now, you need to select ‘Network and Internet’ and click on ‘Wi-Fi’ visible in the left section.

Step 3: Towards the right hand side, you need to click ‘Manage Wi-Fi Settings’.

Step 4: Afterwards, you should disable ‘Connect to networks shared by my friends’ and ‘Connect to suggested open hotspots’.

Try to Reset the TCP/IP Stack

If you are working on a computer running on Windows 10, then it’s time to rebuild the TCP/IP stack. So, here’s what you should move ahead.

Step 1: Initially, you need to open the ‘Run’ dialog box and type ‘CMD’.

Step 2: Once the command window appears on the screen, you need to type ‘netsh int tcp set heuristics disabled’ and hit the ‘Enter’ key.

Step 3: Now, at the command prompt, you need to type ‘netsh int tcp set global autotuninglevel=disabled’ and press ‘Enter’ once again.

Step 4: Finally, you should end with ‘netsh int tcp set global rss=enabled’ and hit ‘Enter’ the third time.

Step 5: Later, you need to reboot the computer and wait till a confirmation is visible on the screen. You would then see a message box with the action, ‘You’ve reset the computer’s TCP/IP’.

Hope you have learnt how to fix WiFi Disconnecting And Dropping Issue. Don’t hesitate to share the blog with your companions if they are disappointed with the Wi-Fi connection.